Directv hd dvr manual keyword after analyzing the system lists the list of keywords related and the list of websites with related content, in addition you can see which keywords most interested customers on the this website

1. As the newest in a family of DIRECTV receivers specifically designed for the commercial market, COM51 adds a new level of density capable of tuning up to 23 high-definition channels as well as capable of tuning DIRECTV 4K content and outputting this content over IP with either Zenith Pro:Idiom™ or Pro:Idiom Mobile™ content protection for HD and 4K broadcasts.
2. The H23-600 is manufactured by LG. It is a HD receiver, non DVR. Features / Other Information: The H23-600 is an SWM capable receiver. It is also the first DIRECTV MPEG4 capable receiver with an internal B-Band Converter. This means even when using a Zinwell WB68 or Zinwell WB616 multi-switch you will not need to.
3. Find great deals on eBay for hd tv receiver. Shop with confidence.

The H23-600 is an SWM capable receiver. It is also the first DIRECTV MPEG4 capable receiver with an internal B-Band Converter. This means even when using a Zinwell WB68 or Zinwell WB616 multi-switch you will not need to connect an external B-Band Converter between the satellite line and the tuner on the H23-600. This problem specifically affects people with the DIRECTV C61K 4K Genie Mini Client and certain audio/video receivers. Denon, Marantz and Yamaha have been mentioned, but I don’t have a comprehensive list of receivers that have the problem. The problem occurs when you feed the HDMI cable into the A/V receiver first and then pass it through to.

Keyword Suggestions

Most Searched Keywords

Domains Actived Recently

› Allhealthpost.com

› Bbs.duomiluntan.com

› Ccswrm.kku.ac.th

› Liquorinsurance.com

› Mihs.daltonpublicschools.com

› Ngoknumeqefy.mihanblog.com

› Shopdowntown.org

› Theindoorhaven.com

› Yourhcu.com

Websites Listing

We found at least 10 Websites Listing below when search with directv hd dvr manual on Search Engine

› Hd portable dvr user manual

› Directv dvr instruction manual

› Direct tv manual for genie

› Directv dvr instructions

DIRECTV HD DVR USER MANUAL Pdf Download ManualsLib

Manualslib.comDA: 18PA: 33MOZ Rank: 51

*A fee of $49 for standard IRD equipment, $249 for DIRECTV DVR, DIRECTV PLUS DVR or Ultimate TV equipment, $400 for HD equipment, or $1,000 for DIRECTV HD DVR equipment will be charged to your DIRECTV bill if the defective equipment that we are replacing for you is …

DIRECTV S el c t The LEFT arrow button often takes you to

Att.comDA: 11PA: 50MOZ Rank: 62

• DIRECTV ® HD DVR User's Guide DIRECTV is dedicated to providing you with quality support and customer service
• If you have questions or difficulties, we would like to hear from you
• For questions regarding your DIRECTV® HD DVR, DIRECTV® programming, or your DIRECTV® DVR …

DIRECTV Manuals: Guides for All Your DIRECTV Equipment

Support.directv.comDA: 19PA: 15MOZ Rank: 36

• Looking for your Genie Lite HD DVR Kit, GenieGO, AM21 Tuner, or satellite dish manual? Just select your equipment from the dropdown below
• Select DIRECTV Equipment Genie Lite HD DVR Kit Manual AM21 OFF AIR TUNER Manual GenieGO Multi-Satellite Antenna Manual Wireless Video Bridge Gen 2

DIRECTV® Plus HD DVR User Guide

Usermanual.wikiDA: 15PA: 50MOZ Rank: 68

• The DIRECTV Plus HD DVR into a surge protector to prevent
• Damage from fluctuations in your power supply
• Your DIRECTV® Plus HD DVR has been designed and manufactured to stringent quality and safety standards
• You should, however, be aware of the following important precautions for safe and optimal use of the equipment.

DirecTV HD DVR Manuals and User Guides, DVR, Receiver

All-guidesbox.comDA: 17PA: 26MOZ Rank: 47

• DirecTV HD DVR DVR: Frequently-viewed manuals
• JMK JDR-913 User Manual Operation & user’s manual (16 pages) NAD T 775 Owner's Manual Owner's manual (46 pages) KENWOOD KR-7600 Instruction Manual Instruction manual (15 pages) CIE-Group WSR-1 User Manual Operation & user’s manual (2 pages) SanDisk V-Mate V-MateTM Video Memory Card Recorder

DIRECTV Universal Remote Control User’s Guide

Att.comDA: 11PA: 50MOZ Rank: 66

Setup Codes for DIRECTV HD Receivers DIRECTV Model H-10 00001, 00002 Hitachi model 61HDX98B 00819 HNS models HIRD-E8, HTL-HD 01750 LG model LSS-3200A, HTL-HD 01750 Mitsubishi model SR-HD5 01749, 00749 Philips model DSHD800R 01749 Proscan model PSHD105 00392 RCA models DTC-100, DTC-210 00392 Samsung model SIR-TS16001276

Troubleshoot a DIRECTV Genie HD DVR

Att.comDA: 11PA: 34MOZ Rank: 51

• If you can't see the DVR playlist when using the DIRECTV app, you'll need to access your HD DVR and your mobile (or GenieGO) device
• Your mobile device can display only one DVR playlist at a time
• Is there more than one HD DVR in your home? If they are not on the same Whole-Home network, make sure you're troubleshooting the right one.

HR54-700 Manual AT&T Community Forums

Forums.att.comDA: 14PA: 50MOZ Rank: 71

• HR54 is the 3rd generation Genie DVR
• Model number is behind the door that also has the access card
• C61 is the most current line of Mini Genie Clients
• Model number is on the label on the underside like many other electronic devices
• Simply put these are the boxes that connect to your two TVs giving you DirecTV service.

Safety & Care Important Safety Instructions

Manuals.solidsignal.comDA: 23PA: 19MOZ Rank: 50

• TIP We highly recommend plugging the DIRECTV Plus HD DVR into a surge protector to prevent damage from fluctuations in your power supply
• Safety & Care Your DIRECTV® Plus HD DVR has been designed and manufactured to stringent quality and safety standards
• You should, however, be aware of the following important precautions for safe and optimal

How do I reconnect my DIRECTV HD DVR to the Internet

Manuals.plusDA: 12PA: 50MOZ Rank: 71

• Contents hide 1 Step 1 2 Step 2 3 Step 1 4 Step 2 5 Step 3 6 Step 4 7 Step 1 8 Step 2 9 Step 3 10 Step 4 10.1 Related Manuals Step 1 Check that your Ethernet cable is connected to your Genie®/HD DVR and Internet router
• When you’re ready, select […]

Guide for Using DIRECTV SWM Technology with Winegard

Manuals.solidsignal.comDA: 23PA: 11MOZ Rank: 44

• Two non-DVR receivers and three DVR receivers are being used for a SWM8 installation
• 2 non-DVR receivers + 2 x 3 DVR receivers = 8 total tuners for SWM installation • Never use B-Band converters with SWM8
• • Do not use a DIRECTV PI-21 power inserter with a SWM8
• Use a DIRECTV power inserter PI-28 or PI-29
• • Never power on all receivers

DIRECTV Genie Lite HD DVR Kit Quick Start Guide

Manuals.plusDA: 12PA: 50MOZ Rank: 73

Contents hide 1 Genie Lite HD DVR Kit 2 Genie Lite HD DVR Kit: 3 Getting Started 3.1 Step 1: 3.2 Step 2: 3.3 Step 3: 3.4 Step 4: 4 Get Connected 5 References 6 Related Manuals Genie Lite HD DVR Kit Genie Lite HD DVR Kit: All the Fun & Benefits of a Full […]

How to set up DIRECTV Genie Mini

Manuals.plusDA: 12PA: 41MOZ Rank: 65

• When exiting the Add a Client screen on the Genie HD DVR, you may get a momentary signal interruption on the TV connected to the Wireless Genie Mini
• This is normal; you’ll see a clear picture shortly
• Manual DirecTV HR34-44 (Genie and Genie Mini) Manual [pdf] DIRECTV Genie 2 DVR (HS17/Genie Server) DIRECTV’s Genie 2 DVR, also

User Guides for Old Phones, Tablets & Devices

Att.comDA: 11PA: 18MOZ Rank: 42

• Or, if you're near your TV, press and hold the INFO button on your remote for 3 seconds
• HD DVR HR20-54 User Guide (PDF - 6.6 MB) DIRECTV Genie 2 Product Manual (PDF - 3.5 MB) Collapse FAQ
• Let's find the right manual for your receiver
• You'll need the model number handy
• Some manuals are designed for several models.

DIRECTV HD Receiver 800-480-0872 Order DIRECTV

Directhd.tvDA: 15PA: 22MOZ Rank: 51

• See what your HDTV can really do
• With the advanced features of the DIRECTV HD Receiver, you’ll enjoy TV like never before
• Get up to 1080i picture resolution for astounding HD clarity and color
• Plus, take advantage of a customizable program guide, search shows up to seven days in advance, control what your children can watch, and more.

Compare DIRECTV Receivers Genie, HD, 3D, DVR & More

Directv.comDA: 15PA: 29MOZ Rank: 59

• DIRECTV receivers are designed to deliver unrivaled TV enjoyment, whether you choose the standard model, HD, 3D, DVR or the state-of-the-art DIRECTV Genie

DIRECTV HD DVR 800-480-0872 Order DIRECTV

Directhd.tvDA: 15PA: 26MOZ Rank: 57

• With the latest DVR and HD technology rolled into one easy-to-use unit, the DIRECTV Plus® HD DVR receiver will change the way you enjoy home theater
• Enjoy up to 1080p HD resolution
• Record your favorite shows and movies in HD
• Plus, take advantage of all the latest DIRECTV features like remote DVR programming from any PC or

DIRECTV Satellite TV Plans Winegard Company

Winegard.comDA: 12PA: 27MOZ Rank: 56

Satellite TV for RV made easy with Winegard and DIRECTV programming! Simply call a Winegard programming specialist at 866-609-9374 and Winegard will walk you through the entire process including signing you up for RV DIRECTV programming, shipping you satellite receivers, and helping you activate!

Correct way to hookup HD24-200 receiver AT&T Community

Forums.att.comDA: 14PA: 50MOZ Rank: 82

• There is one exception to this statement
• IF you have all 24 model DVR's and receivers and IF you have a SWM system, then one of Directv's new model DCAW1R0-01 wireless Cinema Connection Kits will connect all of the HD boxes in the system via a single wireless connection.

How to Connect DIRECTV Genie® to Wi-Fi

Manuals.plusDA: 12PA: 46MOZ Rank: 77

• Watch this video to learn how to connect your Genie ® HD DVR model HR44 to the Internet
• Follow the simple steps for connecting your Genie
• Please note: If your HD DVR used to be connected to the Internet, but it isn’t any longer click here to follow instructions on how to reconnect
• A minimum connection speed of 750Kbps (DSL or cable modem) is required

Amazon.com: DIRECTV HR54 Genie Server (Newest Version

Amazon.comDA: 14PA: 49MOZ Rank: 83

• This DVR works intermittently, making it about useless
• We cannot deal with DirecTv directly at our condo complex, since DirecTv has sub-contracted all service work to a company called Access Media
• They are impossible to deal with, and you can expect to be on hold for between 30 and 80 minutes before you can talk to the customer service

Steps to connect the DIRECTV Genie HD DVR to the TV

Sony.comDA: 12PA: 38MOZ Rank: 71

• The DIRECTV Ready TV also known as receiver-less TV allows additional TV in your Genie HD DVR system to enjoy a full HD DVR experience without the use of additional receivers
• To activate the new DIRECTV service for your Sony® TV, call the DIRECTV Customer Care at 800-531-5000 to schedule a professional installation.

DIRECTV HR24 High Definition Dual Tuner DVR Satellite

Winegard.comDA: 12PA: 50MOZ Rank: 84

• DIRECTV HR24 High Definition Dual Tuner DVR Satellite Receiver | Winegard Company

Whole Home & HR34 & HD Receiver AT&T Community Forums

Forums.att.comDA: 14PA: 50MOZ Rank: 87

• This was a professional install of an HR34, 2 HD DVR's and an HD Receiver
• They did all the wiring and installed the DirecTV equipment and DirecTV splitters I've used the menu's to restart all the equipment, that seems to make things work for awhile ( random amounts of time from 1 or 2 hours to 3-5 hours before the problem will occur again )

Winegard Trav Ler Interface Box Manual Directv

Kerstipomera.wixsite.comDA: 24PA: 50MOZ Rank: 98

• Mar 14, 2018 — I bought this high definition Winegard Trav'ler DIRECTV satellite antenna in January 30 foot power control cable that goes from the satellite dish to the main interface box
• See the manual for full receiver compatibility list.
• Wiring Diagrams Hdtv Dvr Hd Satellite Tv
• Receiver or genie mini directv hd dvr to the

› Mta new york bus

› Newsweek magazine subscription discount

› How to calculate the mean stats

› Directv hd dvr manual

› How much potassium in water

› City of miami ibuild portal

• 2Cable Options

Overview

DirecTV supplies and has supplied a variety of set top boxes (referred to as 'STB' from here on) to consumers. Nearly all of them have the ability, although not directly advertised, to be controlled from an external device, such as a MythTV BackEnd.

Cable Options

WARNING: Not all USB to Serial port adapters are compatible with linux. There are a few well known ones that are made with compatible chipsets (the PL-2303 comes to mind), but there are many more that do not work with any flavor of linux. Please choose your cable with care.

WARNING: You MUST hit the red reset button for many DirecTV receivers to recognize USB-to-serial adapters. The docs that say the port is hot-swap are lying. Further, neither rebooting from the UI nor yanking the power cord is sufficient. Apparently, that red reset button does something particularly special....

Known good adapters are:

1. The Sabrent USB->Serial port adapter (http://www.newegg.com/Product/Product.aspx?Item=N82E16812156008)
   1. WARNING: I ordered one of these and it no longer works with the DirecTV box. These are now using the pl2303X chips instead of the pl2303 and do not work.
2. IOGEAR GUC232A, ATEN UC-232A (pl2303), BAFO BF-810, QVS UR-2000M2, Sabrent SBT-USC1M and other PL2303 based adapters are known working.
   1. WARNING: I ordered two of these (Sabrent?) and they no longer work with the DirecTV box. These are now using the pl2303X chips instead of the pl2303 and do not work.
   2. A new IOGear GUC232A unit worked for me on 2010-06-17, so either they still use the older rev (unlikely) or DirecTV upgraded to a newer Linux kernel that fixes the driver bug with the new revision (likely).
3. http://www.cablestogo.com/product.asp?cat%5fid=1529&sku=26886
   1. July 06, 2007 Update: It has been reported that EMTC (http://www.emtcompany.com/products/adapters/dxubdb9-usb-to-serial-db9-adapter-cable.htm) is no longer shipping linux compatible (PL2303) cables. Previously, they were a good and inexpensive supplier, but the replacement cables are not compatible. DO NOT BUY THESE
4. GWC UC320 (http://www.newegg.com/Product/Product.asp?Item=N82E16812107108). This has been reported to work on both the HD20-100 and D11-500 boxes as of November, 2007.
5. http://www.dtvcontrol.com/index.aspx?content=cable, which shows up under linux as 'Prolific Technology, Inc. PL2303 Serial Port'
6. Dynex DX-UBDB9 purchased off of ebay (February 2009 and August 2009) work fine on the H20-600, H20-100 and H21-200.
7. Paterson Technology USB TV Translator. Works flawlessly on an H23 receiver (also works with D11, D12, and H20) and has additional logic to eliminate the channel banner quickly.
8. Other cables/adapters are unknown (use at your own risk).

Be careful, a lot of these adapters are no longer pl2303 based although they carry the same Model number. Try http://www.cooldvr.com. He carries a complete set of cables (pc or mac to stb) that are tested to work. Cost about the same as buying the parts individually

Official USB to Serial Cable Support

According to the Installers Guide V2.2, the following USB to Serial Adapters are fully supported:

Therefore, it is possible (though not guaranteed) that your particular USB-Serial adapter will work if it has:

• USB Vendor ID= 0x067B
• USB Product ID= 0x2303

To find this out, use the lsusb command after plugging in your device. If it shows a line of output like the following, it should theoretically work.

The USB port on most set top boxes (STBs) should support hot-plugging. However, if you are having troubles with your USB-Serial adapter, try plugging it in before the STB is booted. Particularly, the Installer's guide mentions that the HR20 and HR21 work this way. To do this, simply:

1. Unplug the STB
2. Plug in the serial adapter
3. Plug in the STB and wait until it boots

Afterwards, make sure your device on the mythtv box is correct when you pass it to the script. For me, it was /dev/ttyUSB0.

A simple test command for using the correct device is the following:

If you get 'Error excessive retries', you probably are using the wrong serial port. Set it with the port command as in the above example.

The D10 & RCA Satellite STB

Many of the older (pre 2007) STB's that were sold or leased by DirecTV have a small phone-style port on the back of the unit that is labeled as 'Low Speed Data Port' or simply 'Low Speed Data'. This port, although it can be initially be mistaken as a standard RJ-11 phone jack, is actually quite a bit smaller (in technical terms, it is called an RJ-22) and is sometimes referred to as a 'mini RJ-11' port. If you take a look at the coil handset cable on your non-cordless phone (you still have one of those, right?), you will see that the plug on that cord is the same as the port on the back of the STB.

You will need the following components in order to create a connection from your MythTV backend to the STB:

1. a USB->Serial Adapter (USB Male to 9-pin Male)
2. a handset cord for a corded phone
3. a Serial->RJ45 adapter
4. a short length of ethernet cable with RJ-45 connectors already crimped down on each end

If you prefer to get your hands on a modular serial hood, you can omit the Serial->RJ45 adapter and the ethernet cable. I used the items listed above because that was what I had readily available.

The DirecTV D11/H20 Satellite STB

The DirecTV D11/H20 Satellite set top box contains a USB port that can be used as a serial port to change channels and perform other tasks on the box. To do this, you need the following cables:

1. USB->Serial Adapter (usb male to 9 male).
2. 9-pin Null-Modem Adapter (9 female to 9 female)
3. 9 pin serial cable. (9 female to 9 male)

The end result of this is a null modem serial connection between computers. I assume that using two USB->Serial adapters would also work, (see note below) given that the Null Modem adapter was still used.

I used the BAFO BF-810 adapter (found for $9 online) and a pair of 9pin DSub to RJ45 adapters wired as a crossover serial cable, along with a straight-through ethernet cable.

I started with the directv.pl script used to control the D10 box. I had to change the speed to 115200 from 9600 (contrary to the installers guide which says 9600 or 155200, which must be a typo). I also had to enable hardware flow control in order to get reliable operation.

NOTE: I was using 115,200 baud for months with two D-11 boxes. Around the middle of January 2007 I started getting channel change failures. Switching it to 9600 baud fixed it. My theory is that DirecTV sent down a firmware upgrade to change the all the D-11 boxes to 9600.

NOTE: D11 and H20 boxes require baud rate = 115200 (May 25, 2007)

NOTE: If baud rate = 115200 does not work with the H20 box using the CablesToGo usb->serial adapters, try 9600 (Oct 22, 2007)

NOTE: For Mac OS X connecting to a D11 or H20 use directv.pl ver 1.8 which supports baud rates (for Mac and Linux) >38400. A usb to serial adapter on both ends connected by a null modem cable works fine.(May 25, 2007)

NOTE: I have 2 D11 boxes hooked up to my motherboard that has only 1 serial port connection. One is connected as described above, the other uses the exact same scenario except with an extra USB to Serial adaptor to plug the cable into the motherboard's USB port. This was an extra USB to Serial Adaptor I had bought that didn't work when plugged into the D11 box, but works just fine on the other end. I now have two serial devices connected (ttyS0 and ttyUSB0) and am controlling two boxes without a problem.

The DirecTV H21 Satellite STB

While most of the info listed for the H20 should be applicable to the H21, here are a few specifics of usb->serial adapters which did and didn't work in addition to the configuration and directv.pl settings.This particular setup is: H21 <-> USB/serial converter <-> null modem adapter <-> mb serial port

Keep in mind that there is also this possible combination:H21 <-> USB/serial converter <-> null modem adapter <-> USB/serial converter <-> computerwhich was not tested.

The following parameters were given to the directv.pl script (v1.9):box_type H20 baud 9600 port /dev/ttyS0

The DirecTV H23 Satellite STB

This STB works as well using the H20 commands, version 1.9 of the script and the USB to USB cable set from http://www.cooldvr.com/Buy.html, but it works better for me using the direct channel change command rather than the keypress command. (probably a delay timing thing, but sometimes it would miss the keypresses. it would do this directly from the remote control as well, so it may just be my particular unit) Everything else in the H20 command list seems to work.

DirecTV H24 Satellite STB

The latest version of DirecTV's set top box is the H24. It has a USB port like the previous versions. The directv.pl script (see the External Links section below to download the script) works to change the channels using the H20 'box_type'. I used a usb-serial converter with a PL2303 chip and a null modem adapter to hook it to the serial port on the motherboard.

Making Your Own Custom Cable (D10/RCA)

You can either buy a cable to convert from the low speed data port to a serial port from http://www.dtvcontrol.com/index.aspx?content=cable or, using the pinout either on that page or within this page (they are the same),you can make one on your own.

Overall difficulty of making your own cable is rather low. Take your time, and be prepared to test it once (or twice) before taping everything up to make sure you got it right.

Using the items listed aboce, I grabbed with the handset cable, two serial to RJ-45 adapters, and a short RJ-45 ethernet cable and I:

• Cut the headset cable in half, giving me two pieces of the same approx. length.
• Cut the RJ-45 cable in half giving me two pieces of the same approx. length.
• Cut back the outer sheathing on the RJ-45 cables at the point where I cut it in half.
• Cut back the outer sheathing on the headset cables at the point where I cut it half (this was a pain)
• Cut back the sheathing on the individual exposed wires on the RJ-45 cables and the headset cables.
• Plugged the RJ-45 cables in to the Serial-RJ45 adapters.
• Using a 9-volt battery and a cheap DC tester, I mapped out what pins on the serial side of the adapter mapped to which exposed wires on the cut end of the RJ45 cable. WRITE THEM DOWN. I cannot stress this enough. Because you will be dealing with two different wires, it is easy to get confused. I have these written down at home, and, after making my third adapter, I can tell you that the entire mapping is usually custom since serial-to-RJ45 adapters are not all created equal, the handset cables are not always color coded, and you can use any variant of RJ45 cabling.
• Using your mapping of the serial port adapter to the individual wires in the ethernet cable, write down the proper mapping of the wires from the handset cable to the individual wires of the ethernet cable.
• Following the mapping you just created, hand twist the appropriate wires together and use electrical tape to hold it.

Because I had the DC tester (with the little light on it), I was able to do a final test of the completed connection to confirm that the wires were connected properly. Connect the serial port end to either your MythTV backend's serial port, or, if you don't have one available (most machines now-a-days don't have more than two, and many only have one), plug it in to the USB->Serial port adapter, and plug the USB->Serial port adapter in to an available USB port. Plug the other end of the cable you just made (the mini RJ-11) in to the STB.

Now, test it and make sure it changes channels./usr/local/bin/directv.pl setup_channel 10

If it does not work, you will get something on the command line like 'excessive retries to port' or some similar error. This means, more than likely, that you reversed the mapping of the pins. I say this because that is exactly what I did. I had looked at the mini RJ11 port, and the exposed wires (all of the wires on the one that I had were the same color: gray!) and asked myself 'Which end is pin 1?'

Custom Channel Change Configuration

In order to configure MythTV to call the directv.pl script, you must add the command with desired options to the tuner section of mythtv-setup( User Manual:Detailed configuration Backend ).

1. Run mythtv-setup
2. Select Input connections
3. Choose the connection you would like to control
4. Add the script to the External channel change command parameter

For example, I set mine to...

The help text for this parameter says, 'If specified, this command will be run to change the channel for inputs which have an external tuner device such as a cable box. The first argument will be the channel number.' I interpreted this to mean that the channel will be added to whatever is specified here. This would mean that parameters could be added such as [hide, retries_number n,...]. It appears that once a command is sent like 'hide' it is persistent. So you could specify it in a command window at any time.

Watch out for Xwindows using the serial port by default

In some stock /etc/X11/xorg.conf files, a serial mouse may be configured by default. If this is the case, you may notice unreliable communication with your directv box. Channel changes may not function correctly, multiple timeouts, etc. can occur. You can verify that the serial port is not in use by using the lsof command. For example,

shows that X has the /dev/ttyS0 file open. We can fix this by commenting out the appropriate device section in your /etc/X11/xorg.conf file and restarting X.

Directv H23-600 Hd Receiver Manual Last Version Pdf

udev rules

If you are using a USB->serial adapter on the computer side of things, and are trying control multiple STBs, you will likely need to use udev rules for predictable naming of the USB->serial device. Instructions for udev can be found on the Device_Filenames_and_udev page.

An example rule might look like:

SUBSYSTEMS'usb',KERNELS'5-1:1.0',DRIVERS'pl2303',SYMLINK+='STBChannel0'

In that example, the KERNELS'5-1:1.0' indicates which USB port the adapter is plugged into on the computer. If the USB->serial adaptor does not report any unique identification, using the USB port is the only way.

Note that some distributions come with a gpsd udev rule, which can get in the way. There is probably a more 'proper' way to handle this problem, but on my system I just removed 99-gpsd.rules to fix the problem.

Working around some missing functionality on the channel change script

Note: This user may have been able to fix this problem by both: making sure his box_type was correct, and adjusting the delay sent to the script. Both options are documented in the script's help output.

In my situation, some of the features of the directv.pl script did not function in the way that I liked, or simply did not function with my STB. Specifically, with my STB, the 'setup_channel' function, which is defined in the documentation as 'turning the unit on, changing the channel, and hiding the on screen display' really only did the first two pieces, leaving the OSD up for an obscenely long amount of time. I simply wanted the script to change the channel and hide the OSD immediately.

While the directv.pl script can take the options out of order (eg: directv.pl port /dev/ttyUSB0 hide setup_channel 29), it did not seem to make any difference. This limitation required me to write a small wrapper script called '/usr/local/bin/change_channel.sh' :

I then used '/usr/local/bin/change_channel' in the field as outlined above in the 'Custom Channel Change Configuration' section. Be sure to specify the corresponding port for each of your tuners.

Mini RJ11 (RJ22 or 4P4C) Port Pinout

Mini RJ11 (RJ22 or 4P4C) to Serial Port mapping

Directv H23-600 Hd Receiver Manual Last Version Download

When everything is built, the pinout of the resulting cable should be:

Null Modem Cable Pinout

This is a standard Null-modem cable, but here is the pinout for the sake of being complete:

Serial -> RJ45 (Pin to Wire) Mapping

I used a standard SUN supplied serial to RJ45 adapter and got the following mapping of the serial port pins to the individual wires on the RJ45 cable plugged in to the serial port adapter. I also used a snort length of off-the-shelf pre-made RJ-45 (Cat5) wire.

Hardware Compatibility

• DirecTV D10
• DirecTV D11-100: Same results as D11-500.
• DirecTV D11-300: Works using 9600 baudrate (as of 6/9/09).
• DirecTV D11-500: Channel changing works (by key). On/Off, OSD On/Off, Remote Input On/Off all work. Other features not working yet.
• DirecTV D12: Same as D11-100. Except the D12 supports get_channel where the D11 does not.
• DirecTV D12-100: Works.
• DirecTV D12-300: Works.
• DirecTV H20: Same results as D11-500
• Most DirecTV RCA STB's

Controlling D11 from Windows

I know this isn't myth-related at all, but here is how to control the D11 from windows!

1. Install Perl (I recommend [ActivePerl])
2. Start Perl Package Manager (PPM)
3. Add the BdP Repository: repository add BdP http://www.bribes.org/perl/ppm
4. Install Win32::SerialPort: install Win32-SerialPort
5. Install Win32::API: install Win32-API
6. Install Time::HiRes: install Time-HiRes
7. Download the Windows version of the DirecTV Serial Control Script (see links below). Save it to C:perl

• Example Execution:

perl.exe c:perldirectv2.pl port com1 baudrate 115200 flow none box_type D11 25

Directv H25 Hd Receiver

External Links

• General Set-top Information for Installers V2.1 (Contains serial command guides)
• General Set-top Information for Installers V2.2 (Updated with D12 Information)
• Script modified to work with D11Tried on 2007-12-19; didn't work with D11. Try above, v1.9 worked fine.

• PortMon Windows software to monitor traffic on a com port
• Com Port Toolkit Windows software to send specific commands to the serial port.

For More Information

• Contact the author of this article, User:JeffSimpson

H23 Directv Receiver